A01-14-C02_3X3X1.5
1.Kakaretso tlhaloso
1.1 Boemo
Tlhaloso ena e akaretsa litlhoko tsa li-switches tsa senotlolo se le seng tse se nang top top(TACT SWITCHES:MECHANICAL CONTACT).
1.2 Ts'ebetso ea Mocheso oa Mocheso
-20to+70℃ ， (mongobo o tloaelehileng, mohatla o tloaelehileng.)
1.3 Sebaka sa Mocheso oa polokelo
-25to+85℃ ， (mongobo o tloaelehileng, mohatla o tloaelehileng.)
1.4 Maemo a Teko
Liteko le litekanyo li tla etsoa ho latela maemo a latelang ntle le ha ho boletsoe ka tsela e 'ngoe:
Mocheso o tloaelehileng (mocheso5to35℃)
Mongobo o tlwaelehileng (mongobo o amanang45to85%) Khatello e tloaelehileng (khatello860to1060mbars)
2.MOFUTA OF TS'ELISO
Maikutlo a tactile
3.TS'ELISO TSAMAISO
1 1 1lipalo1akhela
(Lintlha tsa tokisetso ea ho ikopanya li fanoe litšoantšong tsa kopano.)
4.BOHLOKOA LIEKETSENGDC12V50mA
5.Ponahalo le sebopeho
5.1:Ponahalo: Ha ea lokela ho shrinkin e totobetseng, tšepe e ferekaneng, Scrape, tsela ea ho pata e ajoa hantle 'me ha ho na ho tsoa.
5.2:Size:Ho etsa (sethalo se khomaretsoe) 2
5.2: Boholo: Ho etsa (sethalo se khomaretsoe) 3
6. Tlhaloso e akaretsang
6.1 Thepa ea motlakase
| Ntho | Boemo ba Teko | Litlhoko | |
| 6.1.1 | Ikopanye le Resistance | 1(kHz).Ho sebelisa matla a tsitsitseng habeli ho ea bohareng ba kutu, litekanyo li tla etsoa ka1kHz metara e nyane ea hajoale ea ho hanyetsa. | 100mΩ≤100mΩ |
| 6.1.2 | Khanyetso ea Insulation | DC100V/ Litekanyo li tla etsoa kamora ts'ebeliso ea DC 100Bokhoni ba V lipakeng tsa li-terminals le lipakeng tsa li-terminals le foreimi motsotso o le mong. | 100MΩ≥100MΩ |
| 6.1.3 | Dielectric tse mamellang voltage | , AC250V (50HZ-60HZ) AC250V (50Hz kapa 60Hz) e tla sebelisoa lipakeng tsa li-terminals le lipakeng tsa li-terminals le foreimi motsotso o le mong. | Ho ke ke ha e-ba le ho senyeha |
| 6.1.4 | Qhoma | (3-4), Ho otla hanyenyane bohareng ba kutu ka lebelo leo u kopanang le lona ka tšebeliso e tloaelehileng (3to4ts'ebetso ka motsotsoana), Bounce e tla lekoa ha "ON" le "OFF" | 10 mS |
6.2 Thepa ea mochini
| Ntho | Boemo ba Teko | Litlhoko | |
| 6.2.1 | Matla a sebetsang | Beha sesebelisoa e le hore tataiso ea ts'ebetso ea switch e otlolohile ebe butle-butle eketsa mojaro o kentsoeng bohareng ba kutu, boima bo boholo bo hlokehang hore kutu e eme bo tla lekanngoa | 250±50 gf 180±50 gf 100±50 gf |
| 6.2.2 | Tsamaea | Beha sesebelisoa e le hore tataiso ea ts'ebetso ea switjha e otlolohe ebe o kenya moroalo o tsitsitseng habeli ho feta bohare ba kutu, sebaka sa leeto la hore kutu e eme e tla lekanngoa | 0.15±0.05mm |
| 6.2.3 | Khutla Matla | Mohlala oa switjha o kentsoe joalo tataiso ea ts'ebetso ea switjha e otlolohile, 'me ka mor'a ho tepella maikutlo ha stem e kena setsi sa eona sebaka sohle sa leeto, matla a kutu ho khutlela sebakeng sa eona sa mahala a tla lekanngoa | 250gf:80gf min 180gf:60gf min 100gf:40gf min |
| 6.2.4 | Matla a tsitsitseng | 1KG,60 Ho beha switjha joalo hore tataiso ea ts'ebetso ea switch e otlolohile, mojaro o tsitsitseng oa 3 kgf o tla sebelisoa ka lehlakoreng la ts'ebetso ea stem nako ea metsotsoana e 60. | Ho tla ba teng ha ho sesupo sa tšenyo ka mochini le ka motlakase |
6.3 Tšebeletso e tšoarellang
| Ntho | Boemo ba Teko | Litlhoko | |
| 6.3.1 | Bophelo ba ho sebetsa | Litekanyo li tla etsoa ho latela tlhahlobo e boletsoeng ka tlase: (1) Ha ho boemo ba mojaro (2):30~50/ Sekhahla sa ts'ebetso: 30 ho isa ho 50 ts'ebetso ka motsotso (3):510Lipotoloho tsa ts'ebetso: Koporo e entsoeng ka silevera50,000lipotoloho Stainless steel100,000lipotoloho | Kopana le khanyetso: 300mΩ Max. Insulation resistance: 100MΩ Min. Matla a susumetsang: ± 30% +30%kapa-30%ea matla a pele Ntlha ea 6.2.2 |
| 6.3.2 | Ho hanyetsa Mongobo | 1 Ho latela tlhahlobo e boletsoeng ka tlase ho sampole e tla siuoa maemong a mocheso le mongobo ka hora e le 'ngoe pele ho etsoa litekanyo. (1) Mocheso:40±2℃ (2) Mongobo o amanang:90ho95%(3) Nako:96lihora Marotholi a metsi a tla tlosoa. | Kopana le khanyetso: 300mΩ Max. Insulation resistance: 100MΩ Min Ntho 6.1.3, 6.1.4 Ntlha ea 6.2.1–6.2.3 |
| 6.3.3 | Ho hanyetsa Mocheso o Tlase | 1 Ho latela tlhahlobo e boletsoeng ka tlase ho sampole e tla siuoa maemong a mocheso le mongobo ka hora e le 'ngoe pele ho etsoa litekanyo (1) Mocheso:-20±2℃ (2) Nako:96lihora Marotholi a metsi a tla tlosoa. | Kopana le khanyetso: 300mΩ Max. Insulation resistance: 100MΩ Min Ntho 6.1.3, 6.1.4 Ntlha ea 6.2.1–6.2.3 |
| Ntho | Boemo ba Teko | Litlhoko | |
| 6.3.4 | Ho hanyetsa Mocheso | 1Ho latela tlhahlobo e boletsoeng ka tlase ho sampole e tla siuoa maemong a mocheso le mongobo ka hora e le 'ngoe pele ho etsoa litekanyo (1) Mocheso:70±2℃ (2) Nako:96lihora | Kopana le khanyetso: 300mΩ Max. Insulation resistance: 100MΩ Min Ntho 6.1.3, 6.1.4 Ntlha ea 6.2.1–6.2.3 |
| 6.3.5 | Phetoho ea Mocheso | 1Ho latela lipotoloho tse leshome tsa teko ea mocheso o phahameng. Mohlala o tla behoa maemong a tloaelehileng a mocheso le mongobo bakeng sa hora pele litekanyo li etsoa. Nakong tekong ena, marotholi a metsi a tla tlosoa
| Kopana le khanyetso: 300mΩ Max. Insulation resistance: 100MΩ Min Ntho 6.1.3, 6.1.4 Ntlha ea 6.2.1–6.2.3 |
| 6.3.6 | Teko ea Spray ea Letsoai | Teko ea ho fafatsa letsoai e tla etsoa ho latela maemo a latelang:(1) Teko: (5±1)%Nacl() (2) Mocheso:35±2℃ (3) Nako:6lihora 24lihora | Ha ho mosehla le mafome a likarolo tsa tšepe |
| Ntho | Boemo ba Teko | Litlhoko | |
| Ntho 6.1 Ntho 6.2.1, 6.2.2 | |||
| 6.3.7 | Ho hanyetsana le Vibration | Litekanyo li tla etsoa ka mor'a tlhahlobo | |
| beha ka tlase: | |||
| (1) Mefuta e fapaneng ea ho sisinyeha:10ho 55Hz (2) Amplitude: - 1.5mm(pk-to-pk: 1.5mm) (3) Potoloho ea ho fiela:10-55-10Hz (ka motsotso o le mong, hoo e ka bang.) | |||
| (4) Mokhoa oa ho fiela: | |||
| (Ho fiela ka mokhoa oa logarithmically kapa ho fiela junifomo.) | |||
| (5) Tataiso ea oscillation:3,( tse tharo | |||
| ka bobeli perpendicular directions, ho akarelletsa le | |||
| tsela ea leeto la stem.) | |||
| (6)2.6(2lihora ka 'ngoe, bakeng sa kakaretso ea6lihora.) | |||
| Litekanyo li tla etsoa ka mor'a tlhahlobo e behiloeng | |||
| ho ea ka tlase: | |||
| (1) Ho potlakisa: 80g Lipotoloho tsa tlhahlobo: 3, 6 18( 3lipotoloho ka 'ngoe 6litsela, bakeng sa kakaretso ea18lipotoloho) | |||
| 6.3.8 | Impact Shock Resistance |  | Ntho 6.1 Ntho 6.2.1, 6.2.2 |
7. Maemo a welding
| Ntho | Maemo a khothalelitsoeng | |
|
7.1 | Ho soasoa ka letsoho | (1):≤380℃ (2):≤3S (3):≤60WPKa kopo itloaetse ho latela maemo a tlase: (1) Mocheso oa soldering :≤380℃ (2) Nako e tsoelang pele ea ho soahla: ≤3S (3)Bokhoni ba tšepe ea solder:≤60W |
| 7.2 | Automatic flow soldering | Sehlahisoa sena, mofuta oa solder ho latela maemo a latelang: PWB, PWB,,,,PWB,, 260℃. Tlhokomeliso: boemo bo boletsoeng ka holimo ke mocheso sebakeng sa PWB seo likarolo li kenngoa ho sona. Ho na le maemo ao mocheso oa PWB o fapaneng haholo le mocheso o holimo oa switch ho latela thepa ea PWB, boholo, botenya, joalo-joalo. Mocheso o ka holimo oa switjha ha oa lokela ho lumelloa ho feta 260 ℃ |
8.Tse ling mehato ya tlhokomelo
(1) Ho latela ts'ebetso ea solder, u se ke ua leka ho hloekisa sesebelisoa ka solvent kapa tse ling tse joalo.
(2) Sireletsa kopano ea switjha khahlanong le ho kenella ha flux ho tloha kaholimo ho eona.
(3)90Ka kopo etsa hore lihlahisoa li lule li le haufi 'me nako ea polokelo e90matsatsi a guaranty ka mor'a ho fana ka thepa ka ho fetisisa.
